Wrought Iron Fence Austin

(512) 710-1007 | You Need A Fence. We've Got You Covered.
free quote

Wrought Iron Fence Austin: The Solution Of Ultimate Protection

Wrought Iron is one kind of soft alloy of iron. Here the quantity of iron is meager (0.1 percent). Besides, the percentage of slag here is also low (1-2 percent). Because of the presence of slag, a wood-like resemblance is seen in wrought iron. It is produced through the semi-fusion of pure iron. The blacksmiths bring them in shape with high heat and hammering. Wrought Iron Fence Austin has been available for years.

 Travis fencing Austin has done a lot of wrought iron fencing through the years already. So, you can rely on us in this regard very much. Wrought Iron is a different metal than iron. It is not the same as iron. At first, you may mistake it for iron metal. As we stated earlier, it has a wooden similarity. You can see the difference only when the paint is scratched from the metal. 

Wrought Iron Fence Installation Austin 

To install a wrought iron fence Austin, you must go through some steps. But you can also create a combination of other ingredients like cement, stone, or concrete if you want to. It will give another excellent look to your fences.

Gather Everything 

Before starting the installation process, you need to sum up all the necessary things. Like:

  • Fence panels
  • Posts
  • Gates
  • Fastenings
  • Shovel
  • Posthole digger
  • Level
  • Wheelbarrow
  • Screwdriver
  • Gravel

You will need some other things too. Without them, you can not set up your fence correctly. So, they are essential for you.

Setting The Stakes and Lines

It would be best if you started first by setting the stakes according to the fence line. The position of the stake can be changed with the changed position of your fence. To tightly fasten the corner stakes, you will have to use the string. Through the strings, both the directions and angles of the

Digging Post Holes

To place the post in each corner, you will have to dig holes. It would be best to keep them deep, approximately 2 feet and 6-inches wide. After the holes are finish digging, it is time to mix the concrete. Don't add a lot of water to the mixture; otherwise, the support of the fence will be loose.

Setting the Posts

You will need to set the post in the appropriate depth of the hole. Now add concrete after filling them till 4 inches left of the ground. You have to do the same for each post. Dirt is use to keep the post holes tight. Thus, the post will be held straight. Give them a minimum one-week time to dry properly. 

Installing Fence Panels

The fences of wrought iron are produce in panels. In a line, all the panels are install serially. If the line is not made straight properly, the brackets will not fit there correctly. After that, with the help of screws, they are attach from the top to the bottom of the brackets.

Hanging the Gates

You have to give at least seven days to adjust the panels to hang your gate. Finally, with the help of the latches and hinges, the gate is attach. The fence panels may settle after installation. Before hanging a gate, some people wait for a week, allowing panels to adjust. The entrance is attach using the hinges and latches that come with the gate.

Why You Will Trust Us As Your Wrought Iron Fence Installer Austin?

The above process was tiresome, wasn't it? Don't worry. What are we for? We will take all the responsibilities to install your Wrought iron fence Austin. You don't have to go through all the complicated processes. As you are not professional, you may miss out on any steps which will cause you more trouble than your expectations. You will be satisfy in the end certainly. This is our word of honor to you. But we will ask for your opinion on each step about the designs and colors you prefer because we value your idea a lot.

Don’t Miss Out Chance For Free Estimates.

Indeed, you will miss the chance of getting the proper estimates if you don't knock us as we will be giving you the estimate without any consulting fee. So, why are you delaying? Call us now and get to know what you want to do.

Q: How Can I Differentiate Between Wrought Iron And Iron?

A: Iron needs to melt and pour into any mold to let the temperature cool. On the other hand, wrought iron is directly heat and then tried to shape it with proper tools. Wrought iron sparks are bigger than iron. 

Q: Does Wrought Iron Have A Magnetic Feature?

A: Yes. Wrought iron is magnetic. It is something you may ask the manufacturer too.

free quote

Need a Contractor?

If you live in Austin and wonder who's the best 'fencing contractor near me' then you've found your team. We'll take care of your fencing project! 
phonethumbs-up